High-Speed (25⁺Gbps) BGA Mezzanine Connectors

Hirose’s IT5 mezzanine connector system is as comfortable in today’s data rates of PCIe and XAUI as it is in tomorrow’s 25⁺ Gbps systems. With the ability to transmit differential, singleended and power through one package and being stackable from 14 to 40 mm, IT5 can solve your interface needs for both current and future generations.

The IT8 mezzanine connector system was developed to enable 56Gbps performance with 
the highest signal density in the market, featuring Quasi-Coaxial Structure and
Polarity-Swap FEXT cancelling technology.
IT8 delivers the most reliable and flexible solution for your current and future needs
to design high speed systems.

Mechanical Features
1. Stacking heights :
-10 to 13mm (Two-piece type)
-14 to 46mm (Three-piece type)
2. No. of Pos. : 120, 192, 288 signals
3. Multiple mounting capability
±0.2mm floating range in X and Y directions
4. Mating alignment : ±1.5mm
5. 1.0×5.5mm BGA interface optimizes routing and SI performance
6. BGA attachment with “Pin in Ball” ensures reliable solder joints with high SMT
processing yields
7. Excellent reflow solderability with superior BGA coplanarity control
8. Compatible with double-sided and inverted reflow soldering

Signal Integrity Features
1. SI capability
-56⁺Gbps (18 to 46mm), 28⁺Gbps (10 to 16mm)
-92ohm impedance (suitable for both 100ohm & 85Ω system)
2. Unique Polarity-Swap FEXT cancelling technology
3. Quasi-Coaxial Structure to prevent noise emission to adjacent lines
4. Insertion loss to Crosstalk Ratio (ICR)

0.5mm Pitch High Speed Transmission, Right Angle Connector

1 High Speed Transmission (32⁺Gbps)
2 High Density : 50 Differential Pairs/Inch (224pos.)
3 Floating design enables mounting of multiple components on same board
4 Wide Varieties - No. of Pos.: 84pos., 152pos., 224pos.

60A/40A Board-to-Board Power Pin Connectors

1. Up to 60A/pin current rating
2. Unique 3-piece design for flexibility
3. Multiple mating capability (Floating range ±0.3mm)
4. Paste in hole reflow assembly
5. Stacking heights from 10 to 66mm
6. Designed to be used/assembled alongside IT3, IT5, and IT7

[ix Industrial™]
IEC Standard Compliant  Next-Generation Industrial Transmission Connector

Multi-purpose, compact I/O connector for industrial machinery.
IEC Standard IEC 61076-3-124 compliant
Compact, robust and supports high speeds
High EMC resistance

1. Smaller Size, Greater Design Freedom
2. Breakage Prevention
3. Supports a Wide Range of Transmission Speeds
4. Ethernet and others
5. Superior Noise Resistance
6. Easy, but Provides a Reliable Connection
7. THR (Through-Hole Mounting) Compatible

1.2mm Mated Height Max. Micro RF Connector

1 Low profile RF connector (Mated height : 1.2mm Max.)
2 Prevention of plug deformation at removal and improved mating retention force
3 Easy to check the mounting direction using the polarity key
4 Solder wicking / Flux penetration prevention
5 Excellent high frequency performance  
- V.S.W.R : 1.3 Max. (0 to 3GHz)
                 1.5 Max. (3 to 6GHz
                 1.6 Max. (6 to 8GHz)
6 Pick & Place Mounting

2.0mm Pitch, 0.5 Size, Wire-to-Board Connector

1　Space-saving and Wide Variations
2　Meets severe automotive requirements
3　Excellent contact retention within a compact size
4　High contact reliability with long effective mating length and 2-point
　  contact design
5    Safety design with center lock prevents incomplete mating,
      misinsertion and lock damage 

Miniature RF Switch for Automotive

1 High Frequency: DC to 6GHz
2 Contact Design to Prevent Dust Intrusion
3 Wide Self-Alignment Range
4 High Heat Resistance: 105℃
5 Suitable for Automotive Applications
   such as Telematics, Infotainment, Antenna etc.
6 Beryllium Free, Halogen Free

Micro SIM Card Connectors

*Please contact our sales representative prior to your study for adopting the products to in-vehicle devices.

KP10BH Series [Push-Pull, Low profile]
1. Low profile 1.25mm height
2. Reverse card insertion prevention design
3. Buckling prevention eliminates contact damage
4. Card detection switch (Normally open)
5. Easy inspection with exposed contact design

KP10BJ Series [Push-Pull, Ultra Low Profile]
1. Space saving with ultra low profile
2. Reverse card insertion prevention design
3. Buckling prevention design
4. Card detection switch (Normally Open)
5. Easy inspection with exposed contact design

KP10S Series [Push-Push, Ultra Low Profile]
1. Ultra Low profile 1.18mm height
2. Reverse card insertion protection
3. Buckling prevention eliminates contact damage
4. Card detection switch (Normally Close)
5. Easy inspection with exposed contact design

nano SIM Card Connectors
*Please contact our sales representative prior to your study for adopting the products to in-vehicle devices.

KP13B Series
[Height 1.18mm Push-Push, Ultra Low Profile]
1. Ultra Low profile 1.18mm height
2. Incorrect card insertion prevention
3. Card fly-out prevention
4. Card detection switch
5. Easy inspection with exposed contact design

KP13C Series
[Height 1.12mm Push-Pull, Ultra Low Profile]
1. Low profile 1.12mm height
2. Designed to release card from the rear of the socket
3. Incorrect card insertion prevention
4. Contact damage prevention
5. Easy inspection with exposed contact design

KP13CH Series
[Height 1.12mm Push-Pull, Ultra Low Profile]
1. Low profile 1.12mm height
2. Designed to release card from the rear of the socket
3. Incorrect card insertion prevention
4. Contact damage prevention
5. Easy inspection with exposed contact design

KP13TS Series
[Height 1.45mm Bar-push Type with Tray, nano SIM Card Connector]
1. Easy to remove tray with eject pin
2. Buckling prevention eliminates contact damage
3. Enhanced retention force with dual side latches
4. Card detection switch
5. Easy inspection by exposed contact design

Horizontal Type, Monopole Floating Board-to-Board Connector

1.Slim & low-profile

2.Long Effective Mating Length: 1.3mm

3.Floating design

4.Clear tactile click

5.High current capability: 3A

0.5mm Pitch, 21mm Stacking Height,
125℃ Heat Resistant, Floating Board-to-Board Connector

1 Wide ±0.8mm floating range in the X and Y directions
2 High speed transmission (8Gbps)
3 Shield and grounding provide EMI protection
4 Wide self-alignment range : ±1.2mm in X and Y directions
5 Power contacts on each side of the connector (3A/Contact × 4 Contacts)

[SignalBee™]

1mm Pitch, Single-row, Center Lock, Wire-to-Board Connector (UL/C-UL Listed)

1. Wide Variations
2. High Contact Reliability
3. High Vibration Resistance
4. Safety design prevents incomplete mating, mis-insertion and lock damage
5. Halogen-free
6. UL/C-UL Compliant

Shielded Small Waterproof Connector

1. Small, Robust Design
2. Bayonet Lock
3. Waterproof : IP67/IP68* Compliant
4. Easy Shielding Termination
5. Easy Assembly
6. Wide Variety of Configurations
7. High Speed Transmission
8. Safety Standard Certified
9. RoHS2 Compliant

Water-Proof Optical Connector with MT Ferrule



1. Water-proof multi-pos. connector

MT Ferrule into waterproof metal shell.

2. Bayonet lock

Easy and secure installation and removal with Bayonet lock design.

3. Harsh environments

IP67 water-proof compliant.

4. MPO cleaner can be used

Plug and receptacle can be cleaned with MPO cleaner.

5. 5000 mating times

Robust metal shell enables 5000 insertion/extraction.

Ultra-small Push-on Coaxial Connector

1. Push-on System for Easy Attachment and Removal
2. Applicable Cable
　RG Type High Frequency Coaxial Cable
　・RG-178B/U (ø1.8）
　・RG-316/U (ø2.59 Max.）
　Extra-fine Fluororesin Cable
　・Single Shielded Cable（ø1.13,ø1.37,ø1.48）
　・Double Shielded Cable（ø1.32）
　Semi-flexible Cable
　・External conductor diameter equivalent to 0.085 inches
　(With jacket finishing diameter is ø2.5)
　・External conductor diameter equivalent to 0.047 inches
　(With jacket finishing diameter is ø1.44)
3. Double-ended Cable Assembly with Other Hirose Series
4. High Frequency Characteristics
　Guaranteed frequency : DC to 8GHz
(The guaranteed frequency of some parts is DC to 6GHz.)
5. Two Types of Plugs Available
6. RoHS2 Compliant

Non-Magnetic, Long-Life Connector

<Whole Series>
1. Non-magnetic
2. Long life (Mating Durability : 60,000 times)
 

<Coaxial Type>
1. Available in 4, 8pos. Housing
2. High Impedance Matching
3. Easy Insertion and Removal, Low Insertion and Removal Force

<Signal Type>
1. 14pos. Housing
2. Compact and Lightweight Design
3. Support for Through-Hole Mounting and In- Line Cable Harness

1.35mm Height, Coaxial Switch for Ultra Small Size Inspection

1. Low Insertion Loss
2. Low Profile, and Space-Saving
3. Performs Over a Wide Frequency Range
4. Corresponding to Automatic Mounting
5. Halogen- free, RoHS2 Compliant

Subminiature Coaxial Switch 0.85mm Height, 0 to 11GHz

1. Performs over a wide frequency range
Applicable frequencies range over a wide bandwidth, from 0 to 11GHz.

2. Low insertion loss
0.1 dB Max. up to 3GHz (not mated with the probe).
0.2 dB Max. up to 6GHz (not mated with the probe).
0.3 dB Max. up to 11GHz (not mated with the probe).

3. Space-saving and low profile design
0.85mm high above the board.
1.8mm x 1.8mm board space occupation.

4. Minimized Keep Out area and inspection port on chassis
Thanks to thinner probing tip in 2.24mm outer
diameter, customer are able to achieve better space saving design.

5. Automatic board placement
Packaged on tape-and-reel the receptacles can be placed with vacuum nozzles of the automatic placement equipment.

6. Beryllium Free, Halogen Free
Chlorine, and Bromine are not used in the receptacles.
Definition according to IEC 61249-2-21.