[SignalBee™]

2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Standard Certified Product)

1. Positive Lock for Reliable Connection
2. Wide Variation for Flexible Design
3. Secure Side-locking design
4. Prevents incorrect mating
5. Uses the same contacts and crimping tools as DF11 Series
6. Suitable for potting
7. Branch Adapter
8. Composite Branch Adapter
9. UL, C-UL Certified

[SignalBee™]
2mm Pitch, Center Lock, Wire-to-Board Connector (UL/C-UL Listed)

1. Wide-Ranging Options to Meet Diverse Customer Needs
2. Center Lock Design for High-Density Mounting and Easy Operation
3. Secure Mating with Clear Tactile Click
4. High contact reliability with long effective mating length and 2-point contact design
5. Prevents Incorrect Mating
6. Suitable for Potting
7. Compatible Crimping Tools
8. UL, C-UL certified

[EnerBee™]

65A (Derating Curve, Ambient Temperature of 25℃ ), 10.16mm Pitch Wire-to-Board Connectors for Internal Power Supply (UL, C-UL, TÜV Certified

1. Rated for up to 65A (Derating curve, ambient temperature of 25℃)
2. Secure Lock Design Ensures Complete Mating
3. Highly Reliable 5-Points Contact Design
4. Molded Lance Design
5. Reverse Mounting Prevention to PCB
6. Short-Circuit Prevention
7. Solder Crack Prevention
8. Finger-Safe (Electric Shock Prevention)
9. Right Angle Crimp Socket Type
10. UL, C-UL and TÜV Specifications Certified Type Available
11. Glow Wire Compliant (Compliant with IEC 60695- 2-11)

Slim In-Line/THT Connectors

1. The slim, sleek design and smooth contour combine to complete connections
in tight spaces.
2. Secure Lock Mechanism
3. Reliable Contact Design
4. Robust Contact Design
5. Multiple Variations Available
6. Applicator Sharing

High Current, Plastic Power Supply Connectors

1. 4-positions with high current capability (three-phase power supply and ground)
2. Easy crimp termination
3. Standard tooling available
4. Sequenced mating
5. Snap-in lock is easy to operate
6. Attachment Styles
7. Ten keying combinations possible
8. Meets approved safety standards

[FunctionMAX™]

PCIe Gen.4 High Speed Transmission (16⁺Gbps), 0.8mm Pitch, Board-to-Board Connectors

1. Pitch : 0.8mm
2. Variations : Right Angle / Parallel / Coplanar
3. Stacking Height : 7/9/10/12mm
4. Number of Positions : 10/20/30/40/50/60 70/80/100/120/140pos.
5. Large Guide for Easy Mating 
6. Unique Contact Design for Smooth Mating
7. Samtec “Edge Rate®” Licensed Second Source

0.5mm/1mm Pitch 2mm Height 125℃ Heat Resistant FPC/FFC Connector

1. 125℃ heat resistant connector to satisfy sever automotive requirements
2. Robust lock structure with unique contact design
3. Increased FPC/FFC retention force with tabs
4. Easy visual inspection and enhanced PCB retention force by L-shaped metal fittings
5. Board area under the connector is available for PCB patterning
6. Compatible with automatic mounting
7. RoHS compliant, Halogen-free product
8. 500pcs per reel packing option available (For trial production)

[FunctionMAX™]

High Speed Transmission, 0.8mm Pitch Connectors for PCB Connections

1. 0.8mm pitch
2. Connection type: Coplanar/Right Angle/Parallel (Height: 10 to 45mm)
3. No of Pos.: 40, 60, 80, 100, 120, 140, 160, 180
4. MF (Multi-Functional) contact
5. Effective mating length of 2mm (Signal contact)
6. Resistant to excess mating force
7. Simplified mating with large guides

FX18H
0.8mm Pitch, Open Pluggable Specification 2.0 (OPS 2.0) Standard Connector
125℃ Heat-Resistant, Board-to-Board Horizontal Connection Connector

1   Open Pluggable Specification 2.0 (OPS 2.0) Standard Connector
     OPS is an Intel specification that serves as the industry-wide standard for digital signage, etc.  
2   High-Speed Variation of the FX18 Series
　 Enhancing high-speed performance by optimized contact shapes and configurations of the conventional FX18 Series.
3   125℃ Heat Resistance
4   Compatible Mating and Mounting Pattern with the FX18 Series

High Speed Transmission, 0.5mm Pitch
Board-to-Board Floating Connectors

1. Pitch: 0.5mm
2. Connection Type: Stacking (Height : 8 to 30mm)/Right Angle
3. Positions Available: 20/40/60/80/100/120 for signal + 4 pins for power
4. Floating Range: X Direction : ±0.6mm  Y direction: ±0.6mm
5. Supports PCle Gen.4 (16Gbps)
6. Hybrid Power Design (3A/pin×4 lines)
7. Current Capacity: Signal Contact 0.5A/pin  Power Contact 3A/pin
8. Pick & Place (suction tape attached as standard)
9. Large guide post for excellent mating performance

High Speed Transmission, 0.5mm Pitch
Board-to-Board Floating Connectors

1. Pitch: 0.5mm
2. Connection Type: Stacking (Height : 8 to 30mm)/Right Angle
3. Positions Available: 20/40/60/80/100/120 for signal + 4 pins for power
4. Floating Range: X Direction : ±0.6mm  Y direction: ±0.6mm
5. Supports PCle Gen.4 (16Gbps)
6. Hybrid Power Design (3A/pin×4 lines)
7. Current Capacity: Signal Contact 0.5A/pin  Power Contact 3A/pin
8. Pick & Place (suction tape attached as standard)
9. Large guide post for excellent mating performance
 

FX23LH

125℃, Floating Board-to-Board Connector with Power Contacts
1  Floating range: ±0.6mm in X and Y directions
2  High speed transmission capability
    Supports PCIe Gen.4 (16Gbps)
3  Supports 125℃ to meet automotive specs.
4  SMT mounting increases flexibility in component placement
5  Compatible Mating with FX23/FX23L

1.27mm Pitch Multi-Function Two Piece, Wire-to-Board Connectors

Wire-to-Board Type
(1) Positive lock with easy operation
(2) Applicable cable/ 28 AWG

[FunctionMAX™]

13 to 25A Compatible, Position Misalignment Absorption Type
Power Supply Connector for PCB Connections

1. Contact Pitch: 3.81mm, 7.62mm
2. Current Capacity: 13-25A/pin
3. Connection Type: Parallel, Coplanar, Right Angle
4. No. of Pos.: 2 / 3 / 4 / 5pos.
5. Position Misalignment Absorption Range:±0.3 mm
6. Effective Mating Length: 2mm
7. Multi-point Contact Design
8. Low Insertion / Extraction Force
9. Robustness
10. Large Guide For Superior Mating Ability
11. Protected mating face design
12. UL, C-UL and TÜV certified.

Mirror Mezz, High Speed, Low Height, BGA Mezzanine Connector

1  Molex “Mirror Mezz” Licensed Second Source

2  High Speed Transmission (56⁺Gbps NRZ / 112⁺Gbps PAM4)

3  OAM Specified Connector

4  High Pin Count, High Density:
    404pos. (101 Differential Pairs), 688pos. (172 Differential Pairs)

5  Hermaphroditic Connector

6  Stub-less 2-point Contact Design

7   Protective Housing that Encapsulates the Contact Tips
     Prevents Warping During Mating

BGA Mezzanine Connector Supporting 10⁺Gbps

1. Original 3 piece design
2. Stacking Height: 17-42mm
3. Staggered1.5mm×1.75mmball grid array
4. No.of Pos.: 100,200,300(Signal)+ 90％(Additional Grounds)
5. Differential, single-ended and power
6. Low mating/extracting forces for easy operability
7. Wide mating misalignment tolerances for multiple connector use
8. Can be used to provide high current when used with IT-P

High-Speed (25⁺Gbps) BGA Mezzanine Connectors

Hirose’s IT5 mezzanine connector system is as comfortable in today’s data rates of PCIe and XAUI as it is in tomorrow’s 25⁺ Gbps systems. With the ability to transmit differential, singleended and power through one package and being stackable from 14 to 40 mm, IT5 can solve your interface needs for both current and future generations.

High-Speed 56Gbps BGA Mezzanine Connectors

[Mechanical Features]

1. Stacking Heights
 Two-piece Type: 10 to 13mm

 Three-piece Type: 14 to 46mm
2. Available with 120, 192, or 288 signal contacts.
3. Multiple Mating Capability
4. Mating Alignment : +/-1.5mm
5. “Pin in Ball” BGA Attachment
6. Compatible with Doublesided and Inverted Reflow Soldering
7. 1.0mm BGA Row Pitch for High Signal Density

[Signal Integrity Features]
8. SI Capability
9. Unique Polarity-Swap FEXT Cancelling Technology

10. Quasi-Coaxial Design

0.5mm Pitch, High Speed Transmission, Right Angle Connector

1  High Speed Transmission (32Gbps)
2  Floating design enables mounting of multiple components on same board
3  Varieties, No. of Pos.: 152pos.

60A/70A Rated Current, Board-to-Board Power Pin Connectors

1. 60/ 70A per Pin Current Rating
2. Stacking Height Variation : 10 to 66mm
3. 3-piece Design
4. Pitch: 10.8mm & 12mm Pin Paste in Hole (PIH)
5. Suitable for use with high speed transmission mezzanine connectors IT3, IT5 and IT8.

High Current Single Pos. Cable Connector

High current single position cable connector
Space- saving design with right angle plugs
flexible cable wiring
Prevents incorrect insertion with its unique shape.
Meets IP2X finger protection standards.
Standard tools allow for straightforward cable assembly.

1. High current flow
2. Space- saving and flexible wiring
3. Mis-insertion prevention
4. Finger protection.
5. UL, C- UL and TÜV-certified
6. Two variations are available.
7. Standard tool assembly.

High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector

1. Space-saving (0.5 size terminal, 2mm pitch)
2. High Heat Resistance : up to 125℃
3. High Vibration Resistance
4. Rated Current : 5A (Single Pin Power Supply) / 2A (All Pins Power Supply)
5. Retainer Guarantees 40N Tensile Strength
6. Wide Position Varieties (2, 4, 5, 8, 12, 16, 20, 24)

7. Compatible with AWG20 to 26 (0.13 to 0.5 sq)