USB Type-C Connector for Automotive

1　Utilizes HRS’s proven CX Series (USB Type-C connector) as the core component.
2　Highly reliable connector meeting automotive requirements for vibration and heat resistance.
　  - Compliant with USCAR-2 and USCAR-30 standards.
3　CPA (Connector position assurance) unit ensures secure mating.
4　Supports Two Types of Key Code
　  - Standard and A key
5　Support various transmission standards.
　  - USB, Display Port, HDMI, etc.

20A Current, Compact, Waterproof, Signal and Power Hybrid Connector

1. High current capacity and 14 AWG compatibility with compact size Power 20Aｘ2pos., Signal 1A
2. Both front and rear mount types available
3. IPX6/IPX7 Waterproof
4. Easy cable assembly
5. Design prevents damage to lock
6. Light weight

USB Type-C Connector

1. USB Type-C compliant interface connector
2. Reversible plug orientation ensures easy insertion
3. Clear Tactile Click (Excellent Lock Design)
4. Wide Product Variation
5. Halogen-free

High speed transmission, 1 mm pitch Small Interface Connector

1. Small Design (Mating face area reduced by approximately 50% compared to Hirose's half pitch connector)

2. Robust Design

3. Excellent Shielding for EMI Prevention

4. Wide Variation

5. High Speed Data Transmission

Service Plug for 200A Applications

1  200A capability with small size
2  Signal contact with interlocking switch detects mating status
3  Shock resistant multi-contact & bayonet lock systems
   *This series is not suitable for Automotive application.
4  IPX8* water resistance
5  Compatible with commercially available crimp terminal
6  Safety design with IPX2 finger protection
7  UL and TÜV certified

High Current, Plastic Power Supply Connectors

1. 4-positions with high current capability (three-phase power supply and ground)
2. Easy crimp termination
3. Standard tooling available
4. Sequenced mating
5. Snap-in lock is easy to operate
6. Attachment Styles
7. Ten keying combinations possible
8. Meets approved safety standards

Automotive shielded connectors for network and high-speed transmission
1. Full shielded structure
2. Suitable for in-vehicle shielded connectors

Automotive high speed signal shield connector (In-line type)

1. 1.5mm pitch, two rows
2. In-line connector
3. Number of contacts : 4
4. Supports high speed differential transmissions
5. Higher EMI performance through a fully-shielded design
6. Satisfies rigorous test conditions for automotive devices
7. A robust lock provides a tactile click
8. Crimping termination

High Performance, Compact Circular Connectors

1. Both waterproof and non-waterproof types are available
2. Waterproof performance (IP67, IP68 in mated condition)
3. Both crimp and solder type termination are available
4. The receptacle features a jam nut configuration at the front, which allows for easy panel mounting.
5. The jack connector can also be used as a panel jack

Compact, Waterproof, Push-On Bayonet Lock Connectors

1. Unique secure & userfriendly push-on bayonet lock
2. Oil-proof and waterproof design: IPX7 compliant (when mated)
3. Spiral type strain relief design.

High Performance, Ultra-Compact Circular Connectors

1. Small, high density design
2. Wide range of product variations
3. Shielded design
4. RoHS compliant
5. High Speed Transmission
　Supports Cat.5e(1Gbps) high speed Ethernet

Miniature Push-Pull Circular Connectors

Miniature Waterproof Plastic Connectors

1. Small-size with low profile
2. Waterproof construction
3. Push/pull lock
4. Light weight
5. Clamp structure
6. Easy mating operation
7. Mis-insertion prevention
8. Mating mark
9. Complies with the RoHS requirements
​​​​​​​10. High speed transmission
11. Suited for long-term outdoor use

Push-on Bayonet Lock Small Waterproof Connector

1. Water and Dust Protection
2. Easy and Precise Mating
3. Multi-Directional Cable Exit
4. Safty Standards

Plastic-Shelled Waterproof Connectors for Outdoor Use

1. Waterproof connector designed for outdoor use
2. Waterproof structure --- IP67 and IP68
3. Bayonet locking system
4. Easy field assembly
5. Compatible with commercial tooling
6. Sequential Contact
7. Designed to accommodate hot swapping (5 position plug)
8. Surge resistant
9. Gold plated contact area
10.Safety standard certified

Waterproof Connectors for Outdoor Use

1. Waterproof connector designed for outdoor use
2. Waterproof structure: Supports IPX7 and IPX8 ratings while in the mated condition.
3. Easy-to-operate push-on bayonet lock
4. Easy field assembly
5. Sequential Contact
6. Designed to accommodate hot swapping
7. Surge resistant

[ix Industrial™]
IEC Standard Compliant  Next-Generation Industrial Transmission Connector

Multi-purpose, compact I/O connector for industrial machinery.
IEC Standard IEC 61076-3-124 compliant
Compact, robust and supports high speeds
High EMC resistance
 

1. Smaller Size, Greater Design Freedom
2. Breakage Prevention
3. Supports a Wide Range of Transmission Speeds
4. Ethernet and others
5. Superior Noise Resistance
6. Easy, but Provides a Reliable Connection
7. THR (Through-Hole Mounting) Compatible

Shielded Small Waterproof Connector

1.  Small, Robust Design
2.  Bayonet Lock
3.  Waterproof : IPX7/IPX8 Compliant
4.  Easy Shielding Termination
5.  Easy Assembly
6.  Wide Variety of Configurations
7.  High Speed Transmission

　 Cat.5e (1Gbps) and Cat.6A (10Gbps) High-speed Ethernet support
8.  Suited for Long-Term Outdoor Use
9.  Safety Standard Certified

10. RoHS2 Compliant

Power Supply/Signal Connectors for Industrial Equipment

[Non-Waterproof Type] PQ50/PQ50S Series
1. Side locking spring design delivers a clear tactile click.
2. Strengthened Cable Clamps
3. Different cover options.A robust, enhanced, shielded die-cast shell is available
    on the PQ50-20pos. /PQ50S-36pos. or a engineered, light weight plated plastic resin
    shell for the PQ50S-48pos.
4. Coding key system provides flexibility with multiple options.
5. Rear mounted panel shell is available.
6. Reliable ground connection design.
7. Supports NFPA79 compliant cables (with 600V capability).

[Waterproof Type] PQ50W Series
1. Water Resistant (IP65)
2. Special locking design.
3. Rear mounted unit offers easy operations.
4. Metal plated cover with engineering plastic resin adds strength and EMI protection.
5. Independent ground contact design.
6. Coding Key System Provides Flexibility with Multiple Options

[Contact Variations]
1. Available Contact Options
2. Lance Protection Design
3. Sequential Contacts of Different Length are Available
4. Highly Reliable Contact Design
5. Can Use Contacts Between Multiple Series

High Current Single Pos. Cable Connector

High current single position cable connector
Space- saving design with right angle plugs
flexible cable wiring
Prevents incorrect insertion with its unique shape.
Meets IP2X finger protection standards.
Standard tools allow for straightforward cable assembly.

1. High current flow
2. Space- saving and flexible wiring
3. Mis-insertion prevention
4. Finger protection.
5. UL, C- UL and TÜV-certified
6. Two variations are available.
7. Standard tool assembly.