* Forward match search
Simple Assembly In-Line Power Connectors for up to 160A
[ZERO SCREW] Up to 400A ZERO SCREW™ Terminal Block (JIS C8201-7-1)
High Current, Plastic Power Supply Connectors
1. 4-positions with high current capability (three-phase power supply and ground)
2. Easy crimp termination
3. Standard tooling available
4. Sequenced mating
5. Snap-in lock is easy to operate
6. Attachment Styles
7. Ten keying combinations possible
8. Meets approved safety standards
10⁺Gbps 0.8mm pitch Board-to-Board Connectors
1. 0.8mm Pitch
2. Variations : Stacking / Vertical
3. Stacking Height : 7 / 9 / 10 / 12mm
4. Number of Contacts : 10 / 20 / 30 / 40 / 50 / 60 / 70 / 80 / 100 / 120pos
5. Large mating guide for easy mating.: Alignment on plug provides easy insertion operation.
6. Compatible with Samtec's Edge Rate®
0.5mm pitch, 2.55mmheight,Heat resistance 125℃, Connectors for FPC/FFC
0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip
Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
With the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications.
2. FH34SRJ : Increased FPC/FFC retention force
As compared with existing similar construction connectors :
* In horizontal direction : Approximately 2.6 times higher
* In vertical direction : Approximately 2 times higher
3. FH34D : Mechanical lock type
FPC/FFC retention force can be further enhanced by the mechanism of lock contacts.
* In horizontal direction : Approximately 2.5N higher than FH34SRJ
4. Unique Back-Flip rotating actuator
The rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical
5. Easy FPC insertion and reliable electrical connection
Proven Flip Lock actuator allows easy insertion of FPC and provides a tactile sensation when fully closed,
confirming complete electrical and mechanical connection.
6. Delivered with the actuator open
FPC/FPC can be immediately inserted without the need for the opening of the actuator.
7. Accepts standard FPC thickness
0.3mm thick standard Flexible Printed Circuit (FPC) can be used. This is the only ultra-low profile ZIF
connector using standard FPC.
8. Conductive traces on the PCB can run under the connector
No exposed contacts on the bottom of the connector.
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
10. Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement.
Standard reel packaging contains 5000 connectors.
0.5 mm Pitch, 2 mm Height 125℃ Heat Resistant, FPC/FFC Connector
0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector
One Action Lock, Horizontal Type FPC, FFC, Shielded FFC Connectors
1. One Action Lock improves workability
and is ideal for robot assembly
2. Independent spring with two-point contact design
for high contact reliability
- Wiping effect reduces contact failure due to
3. 125℃ heat resistance
- Passed various strict tests for automotive
4. Easy FPC insertion and high retention force
5. Shielded FFC is available for EMI prevention
0.5mm Pitch, 1.2mm Height, 125 degree Heat Resistant, FPC/FFC Connector
0.5mm Pitch, 3.57mm depth One Action Lock, Vertical connection FPC/FFC/Shield FFC connector
1. Automatic one action lock design
2. Two-point contact prevents contact failure by dust
3. Supports FPC/FFC/Shield FFC
4. High FPC retention force
5. Visual inspection on the mated status of FPC/FFC is possible
0.3mm Pitch, 0.9mm Height, Top Contact One Action Lock, High FPC Retention Force Connector
1. Space-saving design
2. Automatic one action lock design
3. High FPC retention force
4. Easy FPC insertion
5. Compatible with 0.2mm thickness FPC
6. Detect FPC Mis-Mating with Original Structure
15+Gbps 0.5mm pitch Stacking Connectors
Electrical Interface for the OIF 100G Long-Haul DWDM Transmission Module (MSA-100GLH)
1. 0.5mm Pitch
2. Stacking height: 4 to 8mm (2-piece type), 8 to 13mm (3-piece type)
3. OIF MSA-100GLH Electrical Interface
FX10A-168P/S-SV(83) assembly is specified for the OIF 100G Long-Haul DWDM Transmission Module host line card - MSA-100GLH electrical connector.
4. Suited to High-Density Applications
5. Optional Ground Plate: An alternate style without the ground plate is available.